ACCCeSS Helpdesk

• Summary of Services
• ACCCeSS Hours and Locations
• Helpdesk Requirements
• UIC-Wireless Support
• Res-Net Wired Support
• Determining your IP Address

ACCC Satellite Services Helpdesk provides technical support free-of-charge to UIC students, staff and faculty:

• Support for UIC-Wireless and Res-Net connections.
• Connecting to UIC-Wireless:
  • SecureW2 for Windows XP/Vista
  • Mac OS X 802.1x Client
  • SecureW2 for Windows Mobile
• Networking (includes bjack) problems and Internet browser issues.
• Adware, spyware, virus, and worm removal.
• Assistance with installation of SecureW2, Symantec AntiVirus, Spyware, Adware and malware removal tools.
• Assistance bringing your Windows and OSX operating systems up-to-date with patches .
• This service is provided free for students, faculty, and staff personal computers. We do provide support for departmental computers, however we suggest contacting the ACCC Micro Repair Office at micros@uic.edu or call (312) 413-0003 to schedule a service call.

The following support is not provided at the ACCCeSS Helpdesk:

• Installation or upgrade of your operating system.
• Installation, configuration or repair of any hardware other than wireless or ethernet cards.
• Installation, configuration or repair of any software other than software supported by UIC.

Spring 2012: Jan 9, 2012 - May 4, 2012

• The ACCCeSS Helpdesk is open on days when classes are being held.

Directions to ACCCeSS Helpdesk Locations

• SCE 401
  750 South Halsted Street
  Chicago, IL 60607
  - This location can be reached by going to the Student Center East and heading to the northern part of the building, referred to as the 'tower', and taking the elevator to the 4th floor. Enter the SCE 401 lab, and head to the back of the lab, where you will see our sign.


• BGRC 181
  1940 West Taylor
  Chicago IL 60612
  - This location can be reached by going to the Benjamin GoldBerg Research Center, found on Taylor St. between Wolcott and Damen. Take the outside staircase up to the main floor, take a left when you enter the building, and the ACCCeSS Helpdesk will be the second door on your left.

Please be advised: Clients must remain at the ACCCeSS Helpdesk while consultants are working on your computer. Therefore, please allow ample time in your schedule before coming to the Helpdesk. For suspended users requiring virus scans, etc., the time requirement may be up to and sometimes over 2 hours depending on the severity of the infection.

Before any work is done on a client's machine, the client must fill out and sign an ACCC waiver form.

When you visit the Helpdesk, please have the following items with you:

For desktop computers:

• computer case
• ethernet cable

Keyboard, mouse, monitor or power cable are not needed.

For laptops:

• laptop
• power supply and power cable
• ethernet cable

Since UIC-Wireless support is provided at ACCCeSS helpdesk, we help with adware, spyware, virus, and worm removal in addition to dealing with UIC-Wireless connection issues. We can help with install/setup/configuration of Symantec Endpoint Protection and the following:

• SecureW2 for Windows
• Mac OS X 802.1x Client in Mac OS 10.3 and 10.4
• Mac OS X 802.1x Client in Mac OS 10.5
• SecureW2 for Windows Mobile

Res-Net website

Please review the following list for troubleshooting tips for your wired Res-Net connection before visiting the ACCCeSS Helpdesk

• Have you properly setup your computer by following the Res-Net Configuration?
• Are you plugging into the correct black bjack and not the telephone jack?
• Have you tried plugging directly to the wall if you are currently connecting through a switch/hub?
• Did you test another computer on your bjack?
• Does your computer state Network Cable Unplugged located near the time clock in the right corner of your screen?
• Does your computer state Limited or No Connectivity near the time clock?
• Is your Local Area Connection saying Connected?
• Are you receiving an valid IP address?
• Do you receive the login Web page or prompt when you access a Web page?
• After repeated logins, do you receive authentication failure?
• Have you attempted to connect through another web browser or telnet?
• When accessing a Web page, do you receive an excessive amount of advertisement popups?
• Do you receive virus and adware warnings?
• Have you recently received an email stating you were suspended from Res-Net for a virus or excessive bandwidth?
• For a list of Frequently Asked Questions regarding Res-Net, please visit the Res-Net FAQ

The questions above may be asked when obtaining support via our helpdesk phone support 312-413-0003 or at the ACCCeSS helpdesk, so please be prepared! If you are unable to resolve the issue, you will be directed or should visit the ACCCeSS helpdesk, see above for details.

IP addresses on the UIC campus are 128.248.nnn.nnn or 131.193.nnn.nnn. To determine your IP Address, follow these instructions:

• Windows 2000/XP/Vista
1. Click Start, then Run. Type in 'cmd' and hit Enter.
2. When the Command Prompt window loads, type 'ipconfig' and hit Enter.
3. You should see a printout that looks something like this:
   Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . :
   Link-local IPv6 Address . . . . . : XXXX::XXXX:XXXX:XXXX:XXXXX
   IPv4 Address. . . . . . . . . . . : XXX.XXX.XXX.XXX
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : XXX.XXX.XXX.XXX
4. Your IP Address is the number that is in the line that reads either IP Address or IPv4 Address, depending on what version of Windows you are running.
• Apple OS X
1. Open the Apple menu by clicking on the Apple icon in the top left corner of your screen.
2. Click on System Preferences, and then on Network when the System Preferences window loads.
3. Click on either Ethernet (if you are connected via a wire) or AirPort (if you are connected wirelessly)
4. For Ethernet, next to Status on the right side of the window, you will see "Ethernet is currently active and has the IP Address XXX.XXX.XXX.XXX.
   For AirPort, click on Advanced on the lower right part of the window then click on TCP/IP tab, and your IP address will be listed next to IPv4 Address.